In this episode we discuss function checking your dive equipment, seafood waste and the first episode of Sea Hunt.
Too often we read about diving incidents that could have been avoided had the diver completed a simple pre-dive function check. It is simple, easy and takes very little time to do. Once everything is assembled, simply turn on your gas, check both regulators (primary and alternate second stage) by breathing both, then power inflate the BCD to ensure it properly inflates and that the over pressurization valve releases. Finally, deflate the BCD. With your function check complete to can now have the peace of mind that your life support gear is working properly.
There is an article in Hakai Magazine by Sasha Chapman titled “Wasted” and it discusses the issue of seafood waste. The article points out that 27 % of fish caught is wasted. This waste happens along every link from harvesting, processing, manufacturing, distribution, retailing and consumers. Sasha discusses the varying causes and points out that it is cheaper to discard than re-purpose.
The first episode of Sea Hunt aired on January 4, 1958. It was titled Sixty Feet Below. There were 39 shows in season 1 and it ran through October 4, 1958. This episode introduces us to Mike Nelson an ex-Navy frogman working at Marine Land of the Pacific. The show is about a downed Navy experimental jet that has a pilot trapped inside. Mike’s job is to mark the jet and rescue the pilot. With time running out on the pilot’s air supply, Mike saves the day.